| Model
number |
Mercury 2370 E-POS PC Socket
370
|
CPU:
Mercury 2370 |
Supports Socket 370 Intel Celeron / PIII (Coppermine)/
VIA Cyrix C3 CPU 533~1G MHz |
| CPU: New
Mercury 3370 |
Support Socket 370 Intel Celeron/ PIII(Tualatin)/VIA Cyrix C3 CPU, from
533 ~ 1.3GHz. |
| Main Memory |
144-pin SODIMM (notebook) x 1 up to 512MB
|
| BIOS |
Enhanced ACPI 1.0 / PnP / APM / DMI / ESCD / PCI bus 2.1
/ On Now / DRAM ECC Quick Boot/ HW Monitor (LDCM) / I-O Pre-set IRQ / Spread
Spectrum / PC98 compliant |
| Floppy Disk Port |
Standard 1.44MB FDD x 1 |
| Parallel Port |
One LPT port (SPP/EPP/ ECP); IRQ and address selector by
BIOS setup |
| Serial Port |
COM1, COM2, COM3, COM4 (COM3/4 output on Riser card);
IRQ selector by BIOS setup (jumperless) and +5v or +12V output on pin 9th by
jumper selector |
| USB |
Two USB ports supporting Windows 95/98/2000
|
| FDD |
1.44MB 3.5" FDD x 1 |
| Enhance PCI IDE |
On board PCI Bus Master IDE1/2 controller with Windows
utility; supports Ultra DMA/66 |
| AGP 3D Graphics Port |
VIA 8604 AGP; shared memory from 2MB up to 32MB(Mercury
2370) |
| VIA-8601T AGP, Share memory from 2MB up to 8MB (New Mercury 3370)
|
| Supports AGP (4X) VGA controller |
Direct X, VPE, MPEG2 |
| Supports DVD Video Accelerator |
PC98 compliant |
| Supports 3D/2D Accelerator |
Supports VESA DPMS VGA monitor |
| NT4.0/5.0, Windows95/98/2000 utility |
CRT output and LCD TMDS output |
| APM/ACPI 1.0 |
Supports dual monitor under Win98/2000
|
| PCI LAN Port |
ACPI/NT4.0/5.0 (NDIS 5) (10/100 Mbs Auto)
|
| Remote Boot ROM for NT4.0 |
| NT4.0/Win95/98/2000 Utility |
| PC98 compliant |
| Enable or Disable by BIOS setup |
| Audio Port |
AC97 CODEC on board |
| Disk On Chip Socket |
2MB up to 144MB (Chip Optional) |
| PS/2 Keyboard Port |
PS/2 type |
| PS/2 Mouse Port |
PS/2 type |
| Front Panel |
AC power on/off button |
3 LED indicators: Power On/Off, |
| 1.44MB FDD x 1 |
HDD state & LAN state |
| Door for FDD and Power switch |
Slim 24 x CD-ROM bay (opt.) |
| Back Panel |
VGA CRT 15-pin DSUB connector |
LAN RJ-45 output connector |
| COM 1/2 9-pin DSUB output |
USB1/USB2 connector |
| COM 3/4 9-pin DSUB output |
2nd CRT/LCD TMDS output (opt.) |
| LPT 25-pin DSUB connector |
Audio line in / line out, mic-in |
| PS/2 keyboard & mouse connector
|
TV S-Video/RCA output (opt.)
|
| Thermal Solution
|
One low noise 50mm fan (two balls)
for Power Supply and HDD |
| One low noise 50mm fan (two balls)
for CPU heat-pipe (water cooling system) |
|
Expansion Slots
(POS Riser Card)
|
Three free slots riser card: one
ISA bus/two PCI bus with COM3/COM4, FDD output and IDE2 CD-ROM output
connector. |
| AC Power Supply |
AT 80W internal industrial power
supply (UL, CSA, VDE, EMI meets FCC *B*) |
| AC Power Source |
AC 90V to 264V, 60HZ/50HZ
|
| Vertical Stand |
Two U type stand per set
(option) |
| Case Dimension |
11" (W) x 11" (D) x 3" (H)
(280 x 280 x 75mm) |
| Export Packing |
Each set packing: 34
x 34 x 17cm NW/GW: 5.5kg/6.5kg |
| S/W Compatibility |
DOS/OS2 V2.1 /XENIX V2.3.2/UNIX
V3.2/NOVELL/ WIN 3.1/95 / 98 /2000 / NT4.0 |
| Operation Temperature |
0ºC to 40ºC (without HDD up to
50ºC) |
| Storage Temperature |
-25ºC to 70ºC
|
|
OPTIONS:
|
| TV Port |
S-Video/RCA TV out port (NTSC or
PAL standard) |
| PCI Modem Card |
Win95/98/2000 utility (33.6 or 56K)
support PCI2.1/ACPI1.0. |
| IDE2 CD-ROM |
On board PCI Bus Master IDE1/2
controller with Win95/98/2000 utility; Ultra DMA/33 |
| Disk On Chip |
2MB up to 144MB
|
| Disk On Module Port |
Compact Flash Card ATA IDE type I
PC card socket |
| Dual VGA out card |
2nd CRT VGA, TV and LCD TMDS add-on
card |
Wearnes 
